Kinetic and mechanistic studies on the formation of bis(dicarboxylato)carbonatochromate(III) complexes

The reaction of the Cr(xx)₂(H₂O)₂ ⁻ (xx = oxalate, malonate and methylmalonate) complexes with dissolved CO₂ was studied by stopped-flow spectrophotometry in the 7 < pH < 9 range and between 20 to 30°C at an ionic strength of 0.5 mol dm⁻³ (NaCl). Under the experimental conditions the aqua complex ion consists of a pH-dependent mixture of Cr(xx)₂(H₂O)₂ ⁻, Cr(xx)₂(OH) (H₂O)²⁻ and Cr(xx)₂(OH)₂ ³⁻. The monohydroxo and dihydroxo species undergo CO₂ uptake and subsequent intramolecular carbonate ligand chelation independently, at rates which are readily distinguishable and are governed by the uptake rate constants k ₁ and k ₂ and chelation rate constants k ₃ and k ₄, respectively. Only the k ₁ values for oxalato, malonato and methylmalonato complexes could be calculated; k ₁ = 1084 and 1333 and 1650 mol⁻¹ dm³ s⁻¹, respectively. The results obtained were compared with those obtained from other systems that have either cobalt(III), iridium(III) or rhodium(III) as central atoms. This revised version was published online in June 2006 with corrections to the Cover Date.     

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid immobilized Amberlite XAD-16 as metal extractant

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid (DMABA) was loaded on Amberlite XAD-16 (AXAD-16) via azo linker and the resulting resin AXAD-16-DMABA explored for enrichment of Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II). The optimum pH values for extraction are 6.5-7.0, 5.0-6.0, 5.5-7.5, 5.0-6.5, 6.5-8.0, 5.5-7.0, 4.0-5.0 and 6.0-7.0, respectively. The sorption capacity was found between 97 and 515 μmol g⁻¹ and the preconcentration factors from 100 to 450. Tolerance limits for foreign species are reported. The kinetics of sorption is fast as t_1/2 is ≤5 min. The chelating resin can be reused for 50 cycles of sorption-desorption without any significant change (<1.5%) in the sorption capacity. The limit of detection values (blank +3 s) are 1.12, 1.38, 1.76, 0.67, 0.77, 2.52, 5.92 and 1.08 μg L⁻¹ for Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II), respectively. The enrichment on AXAD-16-DMABA coupled with monitoring by flame atomic absorption spectrometry (FAAS) is used to determine all the metal ion ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples.     

Thermodynamic interactions in binary mixtures of anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, and 3-methylbutan-1-ol at T = (298.15, 303.15, and 308.15) K

In this paper, excess thermodynamic functions have been computed from the measured values of density, viscosity, and refractive index at T = (298.15, 303.15, and 308.15) K, ultrasonic velocity at T = 298.15 K over the entire mixture composition range of (anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, or 3-methyl butan-1-ol). Excess molar volume, V^E has been calculated from densities, whereas deviations in viscosity, Δη, were computed from the measured viscosities. From ultrasonic velocities, isentropic compressibilities were calculated, from which deviations in isentropic compressibility, Δk_s have been computed. Lorenz-Lorentz mixture rule was used to compute molar refractivity, R from refractivity index data and from these data, deviations in molar refractivity, ΔR have been computed. Computed thermodynamic quantities have been fitted to Redlich and Kister polynomial equation to derive the coefficients and standard errors between experimental and predicted quantities. Intermolecular interactions between anisole and alkanols have been studied based on the computed excess thermodynamic quantities.     

2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

Preparation and Pharmacokinetic Evaluation of Iodine-125 Labeled Alphamethyl-L-Tyrosine

A prompt gamma-ray neutron activation analysis (PGNAA) system was used to calibrate and validate a Monte Carlo model as a proof of principle for the quantification of chlorine in soil. First, the response of an n-type HPGe detector to point sources of ⁶⁰Co and ¹⁵²Eu was determined experimentally and used to calibrate an MCNP4a model of the detector. The refined MCNP4a detector model can predict the absolute peak detection efficiency within 12% in the energy range of 120–1400 keV. Second, a PGNAA system consisting of a light-water moderated ²⁵²Cf (1.06 g) neutron source, and the shielded and collimated HPGe detector was used to collect prompt gamma-ray spectra from Savannah River Site (SRS) soil spiked with chlorine. The spectra were used to calculate the minimum detectable concentration (MDC) of chlorine and the prompt gamma-ray detection probability. Using the ²⁵²Cf based PGNAA system, the MDC for Cl in the SRS soil is 4400 g/g for an 1800-second irradiation based on the analysis of the 6110 keV prompt gamma-ray. MCNP4a was used to predict the PGNAA detection probability, which was accomplished by modeling the neutron and gamma-ray transport components separately. In the energy range of 788 to 6110 keV, the MCNP4a predictions of the prompt gamma-ray detection probability were generally within 60% of the experimental value, thus validating the Monte Carlo model.     

Enhanced slow light propagation in photonic crystal waveguides using angular properties of scatter elements

Applicability of the angular properties of scatter elements as a tool to achieve improved slow light performance with small group velocity dispersion and large bandwidth in photonic crystal waveguides is investigated. A polyatomic photonic crystal waveguide, including two scatter elements with different geometrical shapes in each primitive cell, is proposed to investigate the feasibility of our method. Numerical results show that a versatile control of the dispersion relation of slow light modes, with large normalized delay-bandwidth products ranging from 0.2085 to 0.3394, can be obtained using a unique geometrical parameter.     

Asymmetric conjugate addition of thioglycolate to a range of chalcones using tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

A series of novel TIQ based N,N′-oxide ligands were synthesised and screened for their catalytic activity in the enantioselective conjugate addition of thioglycolate to chalcones. Bulky groups on the side chain of the TIQ backbone provided the highest enantioselectivity of up to 88% with 10 mol % catalyst loading. It was also observed that these reactions proceeded optimally in the presence of dichloromethane as a solvent. Screening of various metals emphasized La(OTf)₃ as the ideal pre-catalyst for this particular reaction.